What do we mean by Street Smart Guitar Pedals?

Answer: Pedals designed for the working musician!  Features such as low battery detection. They will lock to other pedals. Different setting have different color LEDs so you know how the pedal is set up with just a glance. They don't have POT's to adjust, all adjustments can be made with your foot by pressing the switches, just keep playing and adjust your setting..  The settings always repeat--no need to tweak because you moved your pedal, or tripped over it.  In addition many pedals allow you to save your favorite settings.

Let's take the SweetBoost.

1. When running off internal battery the pedal is powered up when the guitar input is connected, when using external a power source the pedal is powered up at all times.

2. When first powered up, a low power state is entered. As soon as the switch is pushed the pedal powers up. In the low power state, the guitar signal passes through unaffected, and a LED will flash each five seconds as opposed to staying on—this serves to lower power consumption.

3. At any boost setting holding the switch down for three seconds will put the pedal into the low power state. This serves to reduce power consumption during breaks without unplugging or just another way to enter a bypass mode.

4. A LED will begin flashing at a fast rate when there is about fifteen to twenty hours of battery life left. This notifies you that you can play a few more gigs, but need to replace the battery soon, as opposed to being surprised in the middle of a show by a battery going dead.

5. A LED will  flash at even a faster rate when there is about four hours of battery life left. This notifies you that you can play another  gig, but need to replace the battery after a few more hours.

6. Holding down the switch while plugging in the guitar will reverse the way the switch operates. This means that if you are in the bypass mode and stomp the switch the pedal will go to max boost and then each time you stomp the switch the boost level will reduce, as opposed to increase.

7. Large soft rubber bumper feet that make the pedal stable and prevents sliding or tipping on most surfaces.

8. Each boost level has a different color LED, that makes it simple just by glancing at the pedal to know the setting of the boost level.

9. Extra long battery life.

10. Has a semi-mute  mode(14db cut) that you can enter.

Lets take the Tremoboost.

1. When switching to Tremolo, the boost level will be maintained.

2. When changing back to Boost the previous Boost setting is remember.

3. When changing back to Tremolo the previous depth and speed setting are remembered but the current boost level is used.

4. A LED flashes at the speed setting from one to twelve hertz and LEDs are color coded to quickly indicate the settings of Boost, Depth and Speed.

5. Switch spacing make it easy to always stomp the correct switch.

6. Depress and hold down the Tremolo switch for three seconds, then each time you power up this will be the first setting the Tremo Boost will enter.

7. PLUS many of the features mentioned above for the Sweet Boost.

Now take the Quick Boost.

1. Able to set a different volume level or the same volume when using the Harmonic Modifier.

2. Same Tone As the Sweet Boost but a couple of more levels of boost.

3. PLUS many of the features stated above.

DOWN LOAD THE MANUALS OR CONTACT US FOR MORE DETAILS. And remember: Changes can be made to these products if required in order for the operation and settings to better suit your needs. These changes can usually be made for a very small or no fee.  Contact us for any special requirements you might have, or to discuss available options. Also, as product improvements are made to a specific pedal, return your pedal  (pay the postal both ways) and we'll update your pedal operation for free.

How do boxes lock together? Check this out--who needs a pedal board.

LISTED ABOVE ARE SOME OF THE STREET SMART FEATURES.

CLOSE